IEG-3024-L is an Industrial Gateway that connects various interface and generation devices to an Ethernet network for a reduced CaPex and low OPEX. The 2-port 10/100 RJ45 uplink connects to the control center or to other gateways to make ring connectivity. Using Modbus RTU to TCP, the most common Ethernet communication packets, sensors can have back and forth communication with the device through its digital and analog ports.
Designed with MQTT protocols the device delivers encrypted packets between client and server through 4G LTE bandwidth at long distances. The device offers a dual sim-card redundancy system to keep the LTE communication always active.
This Gateway is built with industrial-grade components and enclosed in an IP30 case with high thermal conductivity, which protects the device from tools and hazards. Designed to withstand vibration, shock, free fall, interference, and temperatures ranging from -40℃~75℃ (-40°F~167°F), it suits extreme industrial environments. To ensure reliability the redundant power supply and alarm relay contact on the terminal block ensures non-stop operations and issues alerts if power fails. The reset button restores the device to default factory settings if an issue arises after configuration. To ensure reliability the redundant power supply and alarm relay contact on the terminal block ensures non-stop operations and issues alerts if power fails.
MQTT messaging protocol support
Supporting MQTT (Message Queuing Telemetry Transport) for data exchange between clients and the server.
Secure and Easy-to-use VPN Connection
Capable of creating a secure VPN (Virtual Private Network), IEG-3024 Series is “VPN client” and can create the VPN tunnel with “VPN server” (Cloud). Using IEG-3024 series, you can instantly access your office resources through a secure VPN connection.
Digital Input and Analog Input
It has 4 DI and 4 AI input ports to receive analog inputs and digital inputs. The analog input type (Voltage or Current) can be selected using DIP switch.
2 x LAN 10/100BASE-TX RJ45 ports
Internal Module Interface
1 x Mini PCIe for LTE
Wireless - LTE*
SMA Connectors: 2 x 4dBi
4G LTE: Yes
SIM card number: 2
SIM card type: Micro SIM
4 x pairs, Wet Contact
Voltage level : On (10V~50VDC), Off (4VDC max)
Input Impedance: 10k ohm
Overcurrent Protection: 7mA@70VDC
Alarm Relay output
4 x pairs
Voltage : ±5VDC, ±10VDC, 0~5VDC, 0~10VDC
Current: +4 ~ +20 mA
Accuracy: 0.1% FSR
Sampling rate: 10Hz
Input Impedance: Voltage: 1M ohm
Overvoltage protection ±20 VDC
System reboot:5~10 seconds
Factory default: >10 seconds
Connector Type: Terminal Block
Input Voltage: 9~48VDC
Dual power Input support
System: <6W (without LTE module)
PWR,RPS, ALM, Wireless, 100, LNK/ACT
Mechanical and Environment
5~95% RH (non-condensing)
5~95% RH (non-condensing)
515 g (1.14 lb)
31 x 105 x 136mm (1.2 x 4.13 x 5.35 in)
(with AI/DI type)
|IEG-3024-L||Industrial IoT Gateway With 2-port 10/100 RJ45, 4 port DI/4 port AI, LTE PCIe Module not included|
*Specifications subject to change without prior notice.