IEG-3010-W is an Industrial Gateway that connects various interface and generation devices to an Ethernet network for a reduced CaPex and low OPEX. The 2-port 10/100 RJ45 uplink connects to the control center or to other gateways to make ring connectivity. Using Modbus RTU to TCP, the most common Ethernet communication packets, different generation Ethernet machines can connect to this device, reducing the need to replace old expensive and valuable machinery. The serial ports, 2 x RS-232/422/485, are used for legacy devices to connect to Ethernet. The device also transmits data over Wi-Fi at maximum lengths between 50 and 100 meters depending on the application setting. 

This Gateway is built with industrial-grade components and enclosed in an IP30 case with high thermal conductivity, which protects the device from tools and hazards. Designed to withstand vibration, shock, free fall, interference, and temperatures ranging from -40℃~75℃ (-40°F~167°F), it suits extreme industrial environments. To ensure reliability the redundant power supply and alarm relay contact on the terminal block ensures non-stop operations and issues alerts if power fails. The reset button restores the device to default factory settings if an issue arises after configuration. To ensure reliability the redundant power supply and alarm relay contact on the terminal block ensures non-stop operations and issues alerts if power fails.