IEG-3000 is an Industrial Gateway that connects different generation devices to an Ethernet network. The 2-port 10/100 RJ45 uplink connects to the control center or to other gateways to make ring connectivity. Using Modbus RTU to TCP, the most common Ethernet communication packets, different generation Ethernet machines can connect to this device through the 2 x RS-232/RS-422/RS-485 serial ports, reducing the need to replace old expensive and valuable machinery. Sensors can have back and forth transmission with the gateway through its 2 analog- and 2 digital inputs. The device also transmits data over Wi-Fi at maximum lengths between 50 and 100 meters depending on the application setting.
This Gateway is built with industrial-grade components and enclosed in an IP30 case with high thermal conductivity, which protects the device from tools and hazards. Designed to withstand vibration, shock, free fall, interference, and temperatures ranging from -40℃~75℃ (-40°F~167°F), it suits extreme industrial environments. To ensure reliability the redundant power supply and alarm relay contact on the terminal block ensures non-stop operations and issues alerts if power fails. The reset button restores the device to default factory settings if an issue arises after configuration. To ensure reliability the redundant power supply and alarm relay contact on the terminal block ensures non-stop operations and issues alerts if power fails.
Modbus RTU to Modbus TCP
IEG-3000 has 2 serial ports to connect to the Modbus serial devices and through Ethernet port or Wi-Fi to connect to the SCADA supervisor. It converts from serial to TCP/IP protocol to communicate between serial devices and SCADA system.
Communication through Wi-Fi connection
IEG-3000 supports 2.4 GHz Wi-Fi wireless band connection, and it can operate in AP mode or client mode or AP+client modes. IEG-3000 also supports SMA connectors to have external antennas connection flexibility
Secure and Easy-to-use VPN Connection
Capable of creating a secure VPN (Virtual Private Network), IEG-3000 is a “VPN client” and can create the VPN tunnel with a “VPN server” (Cloud). Using IEG-3000, you can instantly access your office resources through a secure VPN connection.
Digital Input and Analog Input
It has 2 DI and 2 AI input ports to receive analog inputs and digital inputs. The analog input type (Voltage or Current) can be selected using DIP switch.
Standards
IEEE 802.3
10BASE-T
IEEE 802.3u
100BASE-TX
IEEE 802.3
Nway Auto-negotiation
IEEE 802.3x
Flow Control
IEEE 802.1AB
LLDP
Interface
Ethernet Interface
2 x LAN 10/100BASE-TX RJ45 ports
Serial Interface
2 x (RS-232/422/485)
Connector type: terminal block (1 x 5 pins)+1 x DB9
2 x RS-232/RS-422/RS-485:
1 x (TxD, RxD, GND),
1 x (T+,T-,R+,R-), (D+, D-), GND
Baud rate: 300bps~460kbps
Serial Interface
Optical Isolation: 3KV
ESD Protection: 15KV
Surge Protection: 6KV
Over Current Protection: Yes
Wireless - Wi-Fi
SMA Connector: 1 x 2dBi
Wi-Fi (1T/1R): 802.11 b/g/n
Digital Input
2 x pairs, Wet Contact
Voltage level : On (10V~50VDC), Off (4VDC max)
Input Impedance: 10k ohm
Overvoltage Protection: 70VDC
Alarm Relay output
24VDC, 1A
Analog Input
2 x pairs
Contact Parameters
Voltage : ±10 VDC
Current: +4 ~ +20 mA
Resolution: 16bit
Analog Input
Accuracy: 0.1% FSR
Sampling rate: 10Hz
Input Impedance: Voltage: 2M ohm, Current: 140 ohm
Overvoltage protection 240Vrms
Overcurrent protection: 50mA@110VDC
Grounding Screw
Yes
Reset Button
System reboot:5~10 seconds
Factory default: >10 seconds
Watch Dog
Yes
Power
Power
Connector Type: Terminal Block
Input Voltage: 9~48VDC
Dual power Input support
Power Consumpion
System: <6W
LED Panel
PWR,RPS, ALM, S1, S2, WiFi, EXT, 100, LNK/ACT
Mechanical and Environment
Housing
Metal, IP30
Mounting
DIN Rail
Operating Temperature
-40ºC~75ºC (-40ºF~167ºF)
Storage Temperature
-40ºC~85ºC (-40ºF~185ºF)
Operating Humidity
5~95% RH (non-condensing)
Storage Humidity
5~95% RH (non-condensing)
Weight
850 g (1.87 Ib)
(without Antenna)
Dimensions (WxDxH)
75 x 106 x 136 mm (2.95 x 4.17 x 5.35 in)
(with AI/DI type)
Ordering Information
| Model | Description |
|---|---|
| IEG-3000-W | Industrial IoT Gateway With 2 x 10/100 RJ45 & 2 x RS-232/RS-422/RS-485 & 2 x DI/2 x AI, Wi-Fi |
*Specifications subject to change without prior notice.
| File Name | Release Date | Download |
|---|---|---|
| IEG-3000-W Datasheet | 2021-07-01 |
|
| IEG-3000-W Photo | 2021-07-01 |
|
