IEG-3010 is an Industrial Gateway that connects various interface and generation devices to an Ethernet network for a reduced CaPex and low OPEX. The 2-port 10/100 RJ45 uplink connects to the control center or to other gateways to make ring connectivity. Using Modbus RTU to TCP, the most common Ethernet communication packets, different generation Ethernet machines can connect to this device, reducing the need to replace old expensive and valuable machinery. The serial ports, 2 x RS-232/422/485, are used for legacy devices to connect to Ethernet.
Designed with MQTT protocols the device delivers encrypted packets between client and server through 4G LTE bandwidth at long distances. The device offers a dual sim-card redundancy system to keep the LTE communication always active.
This Gateway is built with industrial-grade components and enclosed in an IP30 case with high thermal conductivity, which protects the device from tools and hazards. Designed to withstand vibration, shock, free fall, interference, and temperatures ranging from -40℃~75℃ (-40°F~167°F), it suits extreme industrial environments. To ensure reliability the redundant power supply and alarm relay contact on the terminal block ensures non-stop operations and issues alerts if power fails. The reset button restores the device to default factory settings if an issue arises after configuration. To ensure reliability the redundant power supply and alarm relay contact on the terminal block ensures non-stop operations and issues alerts if power fails.
MQTT messaging protocol support
Supporting MQTT (Message Queuing Telemetry Transport) for data exchange between clients and the server.
Modbus RTU to Modbus TCP
Capable of converting serial to TCP/IP protocol for communication between serial devices and the SCADA system.
Secure and Easy-to-use VPN Connection
Capable of creating a secure VPN (Virtual Private Network), IEG-3010 Series is “VPN client” and can create the VPN tunnel with “VPN server” (Cloud). Using IEG-3010 series, you can instantly access your office resources through a secure VPN connection.
2 x LAN 10/100BASE-TX RJ45 ports
2 x (RS-232/422/485)
Connector type: terminal block (1 x 5 pins)+1 x DB9
1 x RS-232 (TxD, RxD, GND),
1 x RS-422/RS-485: (T+,T-,R+,R-), (D+, D-), GND
Baud rate: 300bps~460kbps
Optical Isolation: 3KV
ESD Protection: 15KV
Surge Protection: 6KV
Over Current Protection: Yes
Internal Module Interface
1 x Mini PCIe for LTE
Wireless - LTE*
SMA Connectors: 2 x 4dBi
4G LTE: Yes
SIM card number: 2
SIM card type: Micro SIM
Alarm Relay Contact
System reboot:5~10 seconds
Factory default: >10 seconds
Connector type: Terminal Block
Input voltage: 9~48VDC
Dual power Input Support
System: <6W (without LTE module)
PWR,RPS, ALM, Wireless, 100, LNK/ACT
Mechanical and Environment
5~95% RH (non-condensing)
5~95% RH (non-condensing)
585 g (1.29 Ib)
50 x 106 x 136 mm (1.97 x 4.17 x 5.35 in)
(with AI/DI type)
|IEG-3010-L||Industrial IoT Gateway With 2 x 10/100 RJ45 & 2 x RS-232/RS-422/RS-485, LTE PCIe Module not included|
*Specifications subject to change without prior notice.